Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Boca Raton?
Chimney liner replacement in Boca Raton typically costs $1,800-$4,200, and a partial or full chimney rebuild usually runs $4,500-$14,000 depending on how much of the stack comes down. HeatShield resurfacing, which restores a damaged flue interior without tearing the chimney apart, generally lands between $900 and $2,200. Those ranges cover the materials, labor, and the inspection and venting corrections that go with the job, and the written estimate you receive sets the final price.
We work with professional chimney-industry brands – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – so the liner, the cap, and the venting all get handled as one connected repair instead of three separate contractor calls. Call (877) 685-2248 for a free estimate. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Liner replacement: $1,800-$4,200 typical, materials and labor included.
- HeatShield resurfacing: $900-$2,200, a middle-ground repair that avoids a full teardown.
- Full chimney rebuild: $4,500-$14,000 depending on height, crown condition, and how much masonry is replaced.
- A free inspection with a written report comes first. We’ll tell you exactly what we found before any number is quoted.
- Our technicians have up to 14 years of experience diagnosing flue interiors, offsets, and cap failures across Boca Raton.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the line items break down for the Boca Raton market. These are typical estimated ranges, not a quote for your house – the written estimate after inspection is what sets your price.
| Line item | Typical range |
|---|---|
| Video camera inspection with written report | Free with estimate |
| HeatShield flue resurfacing (per flue) | $900-$2,200 |
| DuraFlex stainless flexible liner, straight flue | $1,800-$2,900 |
| DuraFlex flexible liner with offset or bend | $2,400-$4,200 |
| Insulation wrap for the liner | $300-$700 |
| Top-sealing Gelco or Famco cap and damper | $350-$900 |
| Crown repair or rebuild | $800-$2,500 |
| Partial rebuild (upper stack and crown) | $4,500-$8,500 |
| Full chimney rebuild, masonry to roofline | $8,000-$14,000 |
| Venting correction (Olympia Chimney or Copperfield components) | $250-$1,200 |
What pushes a job toward the top of a range: a flue with a hard offset that needs a flexible DuraFlex system rather than rigid pipe, a chimney tall enough to need scaffolding or a lift, a crown that’s cracked through and needs a full pour, and any hidden damage found once the old liner comes out. What pulls it down: a straight, clean flue where HeatShield resurfacing restores the interior instead of replacing it, and a cap and damper that only need resealing rather than replacement. We quote the whole connected job in one written estimate so there’s no surprise second invoice from a different vendor.
What Affects Chimney Liner & Rebuild Pricing in Boca Raton
Boca Raton’s climate is hard on a chimney in ways northern homeowners wouldn’t expect. Winters are mild, so the big driver here isn’t freeze damage – it’s year-round humidity, salt-free but heavy, that works on mortar joints, crowns, and the outer face of the stack. Add the seasonal rain and the intense sun on a south- or west-facing chimney, and you get a lot of hairline cracking and spalling that a northern climate would take decades to produce. That shapes what a liner and rebuild job costs here.
- Flue configuration. A straight flue accepts a rigid or flexible liner cheaply. A flue with a bend or offset needs a DuraFlex flexible system, which costs more because the liner has to be built and fitted to the curve. We measure the flue before quoting so the number reflects what’s actually there.
- Liner material and insulation. A basic stainless liner sits at the low end. Insulation wrap adds cost but protects the liner and the masonry around it. We’ll explain the trade-off on your specific flue rather than upselling a wrap you don’t need.
- Extent of masonry damage. A cracked crown is a modest repair. Spalling brick across the upper stack means a partial rebuild, and that jumps you into four figures fast. The camera inspection is what separates the two before anyone quotes.
- How much comes down. A partial rebuild replaces the top section and crown. A full rebuild goes down to the roofline. The difference in labor and material is the single biggest driver of a rebuild price.
- Cap and venting needs. A missing or failing cap lets rain and animals in and accelerates the damage. Gelco and Famco cap products and Olympia Chimney venting corrections get handled at the same visit, which keeps a small add-on from becoming a separate contractor call.
- Access and height. A tall chimney or a steep roof pitch means more setup, and setup is labor. It’s part of why two houses on the same street can get different estimates.
How to Save on Chimney Liner & Rebuild
The biggest savings on a liner or rebuild come from catching the problem before it spreads. A cracked crown or a small gap in the flue lining is a modest repair. Left alone through a few rainy seasons, it becomes spalled masonry and a full rebuild. That’s the whole case for an annual inspection – it’s cheap insurance against a four-figure job.
- Get the inspection before you commit to a rebuild. HeatShield resurfacing restores a deteriorating flue interior for a fraction of a full liner replacement in many cases. Ask specifically whether resurfacing is an option for your flue before you accept a teardown price.
- Fix the cap now, not later. A proper top-sealing cap keeps rain, birds, and squirrels out. It’s a small line item that prevents the water intrusion that drives most rebuilds in Boca Raton’s humid climate.
- Bundle the cap and venting with the liner job. Doing them on the same visit avoids a second contractor call and a second estimate. We handle all three pillars of chimney care – sweeping, inspection, and repair – in one relationship.
- Keep up the annual sweep. A clean flue lets the inspection see the actual condition of the liner instead of a layer of creosote. That means an honest assessment of whether you need a repair or not.
- Ask for the written report. A real inspection names specific deficiencies. If a quote doesn’t tell you what was found and why it costs what it costs, get a second opinion.
Estimates are free. Call (877) 685-2248 and we’ll set up the inspection. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Chimney Liner & Rebuild Cost
How much does chimney liner replacement cost in Boca Raton?
Chimney liner replacement in Boca Raton typically costs $1,800-$4,200, with a straight flue at the low end and a flue with an offset needing a flexible DuraFlex system at the high end. Insulation wrap and a cap add to that if they’re needed. Call (877) 685-2248 for an exact quote – estimates are free.
Is it cheaper to repair or replace a chimney liner?
Repair is usually cheaper: HeatShield resurfacing runs $900-$2,200 versus $1,800-$4,200 for a full liner replacement. Whether resurfacing is appropriate depends on how much of the flue interior is still sound, which the camera inspection determines. We’ll tell you exactly what we found and which option fits. Call (877) 685-2248 to book an inspection.
How much does a chimney rebuild cost in Boca Raton?
A partial chimney rebuild typically costs $4,500-$8,500 and a full rebuild to the roofline runs $8,000-$14,000. The price depends on how much masonry comes down, the chimney’s height, and the crown condition. Call (877) 685-2248 for a free estimate on your specific stack.
Why are chimney rebuilds so common in South Florida?
Year-round humidity and heavy seasonal rain work on mortar joints and crowns constantly, so Boca Raton chimneys tend to show spalling and cracked crowns earlier than a mild northern climate would produce. A failing cap makes it worse by letting water straight in. The fix is usually catching it at the crown stage before it becomes a rebuild. Call (877) 685-2248 to have yours checked.
Can you inspect my chimney and quote a liner on the same visit?
Yes. We run a video inspection and give you a written report, and in most cases we can quote the liner or rebuild from that same visit. Our technicians have up to 14 years of experience reading flue interiors. Call (877) 685-2248. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday.
Do I need a liner if I only use the fireplace occasionally?
Yes, a sound liner protects the house whether you burn daily or a few times a year, and a damaged one is a fire and carbon-monoxide risk on the first fire, not the hundredth. If you’re unsure of your liner’s condition, book the inspection before your next burn. Call (877) 685-2248 for a free estimate.
Contact Us for a Free Chimney Liner or Rebuild Estimate in Boca Raton
If you’ve been putting off the liner question, this is the moment to get a straight answer. We handle sweeping, inspection, and repair as one connected job, we use professional-grade products – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – and we tell you exactly what we found before any work is quoted. That’s what chimney sweep Boca Raton looks like when it’s done as a full service rather than a single visit. If you’re weighing repair against a rebuild, our Boca Raton team can walk you through both options on-site. Call (877) 685-2248 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Boca Raton market as of 2026. Chimney Sweep Boca Raton offers free estimates – call (877) 685-2248.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Yolanda Coleman"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Hector Martinez"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Maria Guzman