Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Palm Springs, FL
When Palm Springs homeowners call about chimney work, the job is usually a chimney inspection rather than a routine cleaning. This village of mostly mid-century concrete-block homes was built before central air conditioning, and the flue that once served a fireplace or a gas water heater is often the only venting system left in the house. In our subtropical climate those chimneys see little heating use but plenty of humidity, wind-driven rain and salt air. That combination rusts dampers and spalls mortar crowns. Call (877) 685-2248 and we’ll tell you exactly what we found.
Why Palm Springs Homes Are Different
Palm Springs is a working-class village of predominantly mid-century concrete-block homes with stucco exteriors and low-pitch roofs, and that shapes every chimney job we run here. Most of this housing stock went up in the 1950s through the 1970s with interior chimney chases tied to fireplaces or floor furnaces. Many have since been re-roofed with metal or shingle and the original flue re-lined or abandoned in place. For older Latino and Caribbean households that still rely on those systems, “chimney cleaning” really means combustion-appliance vent inspection.
The climate does the rest. Chimneys here rarely see heavy creosote because heating season is mild. Instead we find rusted dampers, cracked mortar crowns and moisture-driven spalling from humidity and salt air. A storm-driven roof leak can turn a routine cleaning call into a venting-safety check. That’s the pattern in Palm Springs – not the cold-climate problems you’d read about in a national guide.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Palm Springs Services
Two calls come up most in Palm Springs: a sweep for the fireplace or wood stove that still gets used, and a repair when moisture or storm damage has caught up with the chimney.
Chimney Sweep in Palm Springs
In Palm Springs a sweep is often a venting check as much as a brush-down. We run the flue, verify draft at the damper, and confirm that a metal vent pipe from a gas water heater hasn’t been tied into the same chase as a fireplace. Salt air and humidity here rust dampers and loosen mortar at the crown, so we look at the top of the chimney as closely as the firebox. When the flue needs more than a sweep, we can book chimney sweep work as one visit. We use Euro-tools and a camera so you see what we see.

Chimney Repair in Palm Springs
Repair in Palm Springs usually means moisture work: a cracked crown, spalled mortar joints, a rusted damper, or a flue that’s come loose from wind-driven rain. Concrete-block homes on low-pitch roofs take a beating from sun and salt, and the chimney crown is often the first thing to fail. We’ll look at the whole assembly before recommending anything, and we can install a properly fitted cap with Famco or Gelco products so the top is sealed in the same visit. When liner damage shows up, book chimney repair and we’ll show you the camera footage before quoting.

Chimney Inspection in Palm Springs
Chimney Inspection in Palm Springs is where most local chimney work actually starts. The village’s mid-century concrete-block homes were built with chimney chases for fireplaces, floor furnaces, or gas water heaters, and many of those systems sit on their own after central A/C was added. Our subtropical climate means the failures we find here are moisture failures – rusted dampers, spalled mortar, cracked crowns – not heavy creosote. A camera-based inspection catches those before they become a safety issue. Learn more on our Chimney Inspection page.
Chimney Flue Inspection
Flue inspection is the core of the visit in Palm Springs, because the flue is typically the piece of the system that’s been modified the most since the house was built.
Signs you need it
A gas water heater that smells off, a fireplace that smokes into the room, or any visible rust or flaking around the flue collar tells you it’s time.
What it costs in Palm Springs
Flue inspection typically runs $125 to $250 here, with a camera-assisted level 2 at the higher end.
How we do it
We open the damper, run a camera down the full flue, check the termination and cap, and photograph anything that needs attention so you see it on the same screen.
Chimney Fire
Chimney Fire isn’t something we joke about in this climate. Even a fireplace used a few times each winter can suffer a glaze layer of creosote that ignites.
Signs you need it
Popping or roaring from the flue, a puffy or honeycomb creosote layer, or a strong chemical smell after a burn are all reasons to stop using the fireplace and book an inspection.
What it costs in Palm Springs
A post-fire inspection runs $200 to $400, and a professional sweep runs $150 to $300, with any damage found quoted separately.
How we do it
We inspect the full flue for damage after any chimney fire, sweep what’s safe to sweep, assess the liner, and tell you plainly whether the chimney can be returned to service or needs repair.
What Chimney Inspection Costs in Palm Springs
Prices below are typical estimates for Palm Springs. The written estimate from us sets the final price.
| Item | Typical range in Palm Springs |
|---|---|
| Level 1 chimney inspection | $100 – $200 |
| Level 2 chimney inspection with camera | $200 – $400 |
| Post-chimney-fire assessment | $200 – $400 |
Will a chimney inspection actually find anything in a house this old?
Yes, usually. Mid-century concrete-block homes in Palm Springs frequently have rusted dampers, cracked crowns, or a flue abandoned after re-roofing. A camera inspection shows the exact condition of the flue, so you know whether the system is safe to use.
Do I need a level 2 inspection or is a level 1 enough?
A level 1 is fine for a chimney in steady use with no changes. After a storm-driven roof leak, a re-roof, a liner change, or any chimney fire, a level 2 with a camera is the right call in Palm Springs. Call (877) 685-2248 for an exact quote.
Brands We Service in Palm Springs
We work with a curated roster of professional chimney-industry brands – DuraFlex flexible liners, Olympia Chimney components, Famco and Copperfield venting and caps, and HeatShield resurfacing. We don’t stock parts locally, so turnaround depends on the specific component and you’ll get a clear lead time with the estimate. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Palm Springs, FL
Every price below is a typical estimate for Palm Springs work, based on the condition we actually find. The written estimate sets the final price, and it’s free to get one. Call (877) 685-2248 for yours.
| Service | Typical range in Palm Springs |
|---|---|
| Chimney sweep | $150 – $300 |
| Level 1 chimney inspection | $100 – $200 |
| Level 2 chimney inspection with camera | $200 – $400 |
| Post-chimney-fire assessment | $200 – $400 |
| Chimney cap installation | $200 – $450 |
| Damper replacement | $250 – $600 |
| Crown repair | $300 – $800 |
| HeatShield flue resurfacing | $1,200 – $2,800 |
| DuraFlex flexible liner installation | $2,000 – $5,500 |
What pushes price up in Palm Springs is usually access and damage depth: a flue with bends or offsets needs a flexible liner rather than a rigid one, and a chimney with heavy moisture spalling takes more restoration before a cap or liner goes in. Height and roof pitch affect the scaffolding and time on the roof. We agree the sweep or inspection on a fixed price before we book, and any repair work comes with a written estimate the price can’t move past.
Neighborhoods We Serve in Palm Springs
We cover the whole village of Palm Springs and the surrounding communities on the western edge of Palm Beach County. Homes on the older blocks near the center of the village often have the original 1950s flue and crown still in place, while the re-roofed homes on the eastern side tend to have a flue that’s been modified at least once. Either way, our response across the village is uniform – one dispatch note, not a different timeline for each street. Our technicians have up to 14 years of experience.
- Downtown Palm Springs and the original mid-century core
- Homes along the Lake Clarke Shores border
- The blocks near Greenacres and the eastern edge of the village
- Palm Springs residential streets south toward Lantana
Service Area – Cities Near Palm Springs
Palm Springs sits between several villages and cities we also cover, so calls often come from just over the line. If you’re in Lake Clarke Shores, FL, we can usually route a technician from the north side of the village. Homes in Greenacres, FL abut Palm Springs on the east, and we cover that side of the border regularly. To the south, we serve Lake Worth Beach, FL and Lantana, FL from the same dispatch. Palm Springs is the center of our local coverage here, and the surrounding cities share the same climate and housing stock.
Serving Palm Springs, FL – Our Local Coverage Area
We serve Palm Springs and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Palm Springs
Fast dispatch from 7am to 7pm, Sunday through Friday. We answer 24/7, and a call outside dispatch hours is booked into the next opening. Palm Springs is central to our coverage here, so we can usually schedule within the week for standard inspections and sweeps.
Chimney repair work that alters the structure, like a liner replacement or crown rebuild, often requires a permit from the village. The exact rule depends on scope, so ask your building department before work starts, and check with your HOA on anything visible from the street. We can work with whichever permitting route you need.
We cover the full village of Palm Springs, from the original mid-century core out to the eastern edge near Greenacres. The surrounding cities – Lake Clarke Shores, Greenacres, Lake Worth Beach, and Lantana – share the same coverage. Call (877) 685-2248 with your cross streets and we’ll confirm.
If your fireplace hasn’t been looked at since the last storm season, the safest next step is a camera inspection. Call (877) 685-2248 to schedule a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Palm Springs Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Yolanda Coleman"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Hector Martinez"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Maria Guzman