Chimney Repair in Boca Raton, FL | Chimney Sweep Boca Raton

Chimney Repair in Boca Raton - Inspected on Camera, Then Priced in Writing

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Repair for Boca Raton Homeowners

Chimney repair in Boca Raton solves the problems that sweeping alone can’t: cracked flue tiles, a rusted damper, a cap that came loose in a storm, or flashing that has pulled away from the roofline and let water into the masonry. We diagnose those issues with a camera inspection and then fix them, so you’re not handed a list of problems and left to find someone else. Our technicians have up to 14 years of experience, and they’ll tell you exactly what they found and what it will take.

Call (877) 685-2248

Some repairs are urgent. A damaged flue or a blocked flue is a fire and carbon-monoxide risk the moment you light a fire, and it doesn’t fix itself with another season of use. Others can wait, and we’ll say so plainly. If you’re not sure which you have, call (877) 685-2248 and we’ll book a visit. Same-day repair is often possible when the work is straightforward.

Chimney Cap Installation

Chimney cap installation means fitting a protective cover over the top of the flue, and it’s the simplest way to keep rain, animals and debris from getting into a chimney that’s otherwise sound. You need one if your flue is open to the sky, if you’ve heard birds or squirrels in the chimney, or if water is finding its way down onto the damper. We fit caps from Gelco and Famco, sized to the flue rather than forced over it, and we check the crown and flue at the same time so the cap isn’t covering a problem. Typical chimney cap installation in Boca Raton runs $250-$650 depending on the flue count and the cap material. The written estimate sets the final price, and there’s no charge for the estimate itself.

Stainless Caps and Animal Guards

Stainless steel caps last longer in Florida humidity than painted steel, and a properly fitted animal guard keeps nesting season from turning into a chimney full of twigs. We match the mesh size to your flue so sparks stay in and wildlife stays out.

Multi-Flue and Odd-Sized Openings

Chimneys with two or three flues, or with an unusually shaped opening, take a custom-fit cap rather than a stock one. We measure the actual opening and order to that measurement, so the cap sits level and seals against the crown.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Cap Replacement

Chimney cap replacement is the job when a cap is already there but no longer doing its work: rusted through, dented, missing mesh, or sitting loose enough that wind shifts it. You’ll usually notice it from the ground as a cap that looks crooked, or from inside as water stains or a draft that wasn’t there before. We remove the old cap, inspect what it was hiding, and fit a new one. Typical chimney cap replacement in Boca Raton runs $200-$550 depending on the cap size and how much prep the crown needs. The written estimate sets the final price.

What a Failed Cap Looks Like

Rust streaks down the cap, mesh that has torn away at the corners, or a top plate that has lifted on one side all point to failure. Once the mesh goes, animals and rain get in with nothing stopping them.

Why the Old Cap Failed

Cheap painted steel and undersized caps that rattle in the wind are the two common causes. Fitting the right size and material the second time costs less than replacing a bad cap every few years.

Chimney Liner Installation

Chimney liner installation puts a new flue inside the old one, and it’s the repair that matters most when the original clay tiles are cracked, spalling, or missing mortar joints. Those gaps let heat and carbon monoxide reach the framing around the chimney, which is exactly the condition a chimney sweep is looking for during inspection. When a full tear-out isn’t necessary, we resurface the existing flue with HeatShield, which restores a smooth, sealed interior without a rebuild. When the flue has bends or offsets that rigid pipe can’t follow, we use a DuraFlex flexible liner sized to the appliance. Typical liner work in Boca Raton runs $2,800-$6,500 depending on flue length, appliance type and whether resurfacing or full relining is the right call. The written estimate sets the final price.

Resurfacing Instead of Relining

HeatShield is applied to a cleaned flue and worked into the cracks and joints, then smoothed to restore the original shape. It’s a middle path between doing nothing and paying for a full liner, and it’s only appropriate when the tile structure is still sound.

Flexible Liners for Offset Flues

Many Boca Raton chimneys don’t run straight, and a rigid liner forced into an offset flue creates its own problems. DuraFlex flexes through the bend and still holds its shape once it’s in place.

Chimney Flashing Repair

Chimney flashing repair deals with the metal that seals the joint between the chimney and the roof, and it’s the most common source of chimney leaks we find. When flashing pulls loose, rusts through, or was never installed correctly in the first place, water gets into the attic and the masonry, and you’ll see it as a ceiling stain far from the chimney itself. We reset or replace the flashing, seal the counter-flashing into the masonry, and check the roof around it. Typical flashing repair in Boca Raton runs $350-$900 depending on the roof pitch and whether the whole assembly is replaced. The written estimate sets the final price.

Tracing a Leak to the Flashing

Leaks that appear near the chimney aren’t always the chimney’s fault, and leaks that show up across the room usually are. We check the flashing joint first, because it fails more often than the flue does.

When the Flashing Was Never Right

Some chimneys were flashed with sealant instead of proper metal step flashing. That works for a season or two and then fails. Rebuilding the joint correctly once is cheaper than chasing it every year.

Chimney Crown Repair

Chimney crown repair fixes the concrete cap on top of the chimney that sheds water away from the masonry below, and a cracked crown is the quiet cause of a lot of interior damage. Hairline cracks let water in, water freezes and expands the crack, and the cycle repeats until the crown is in pieces. We repair minor cracking, rebuild badly deteriorated crowns, and add a proper overhang so water runs off the edge instead of down the side. Typical crown repair in Boca Raton runs $400-$1,200 depending on the size of the crown and whether it’s patched or rebuilt. The written estimate sets the final price.

Cracks That Need Attention Now

Any crack wide enough to catch a fingernail, or a crown that has separated from the flue, needs repair before the rainy season. Small checks that haven’t moved can often wait.

Rebuilding a Crumbling Crown

When the crown has broken into sections, patching it is wasted money. We form and pour a new crown with the correct slope so it drains properly from day one.

Chimney Repair Companies

Chimney repair companies vary widely in what they can actually do, and in Boca Raton the difference usually shows up in whether they can finish the job they start. Plenty of companies can sweep. Fewer can diagnose a flue with a camera, resurface it, reline it, and cap it without handing you off to someone else halfway through. Because we handle sweeping, inspection and repair as one service relationship, there’s no finger-pointing between vendors when something needs fixing. Typical repair work in Boca Raton runs from a few hundred dollars for a cap or flashing to several thousand for full relining, set by written estimate after we’ve seen the chimney.

Questions Worth Asking

Ask whether the company performs the repair itself or subcontracts it, and whether you’ll get photos of what they found. A company that can show you the problem is a company you can hold to the work.

Reading an Estimate Carefully

A good estimate names the specific deficiency, the material going in, and the price. If it lists “chimney repairs” with no detail, ask for detail before you sign anything.

Chimney Masonry Repair

Chimney masonry repair addresses the brick and mortar itself: spalling faces, eroded joints, and bricks that have gone soft after years of moisture. Mortar joints are the usual starting point. They take the weather so the bricks don’t, and when they erode the bricks follow. We repoint joints, replace spalled brick, and address the water source that caused the damage in the first place, since new mortar over a leaking crown is money spent twice. Typical masonry repair in Boca Raton runs $600-$2,500 depending on how much of the chimney is affected. The written estimate sets the final price.

Repointing Versus Rebuilding

Most eroded joints can be ground out and repointed without touching the bricks. A rebuild only becomes necessary when the brick faces themselves have failed, and that’s usually a small section rather than the whole stack.

Stopping the Water First

Masonry damage almost always starts with water getting in somewhere it shouldn’t. We look at the crown and flashing before we touch a joint, because fixing the symptom without the cause doesn’t last.

Brands We Service

We work with professional-grade chimney brands rather than hardware-store substitutes, and we know where each one tends to wear out. HeatShield is a resurfacing system, and the quality of the application matters as much as the material: we clean and prep the flue properly first, because HeatShield applied over a dirty flue won’t bond. DuraFlex flexible liners go into chimneys with bends and offsets, and we size them to the appliance so the flue draws correctly. Gelco and Famco cover caps and venting components, and we fit them to the actual flue opening rather than forcing a stock size. Olympia Chimney and Copperfield round out the lineup for liner and venting work.

If your chimney has a brand we haven’t named, that’s fine. The materials vary but the diagnosis doesn’t: we inspect, show you what we found, and recommend the repair the chimney actually needs. Whether you have HeatShield resurfacing, a DuraFlex liner, a Gelco cap, an Olympia Chimney component or any other make, we can help.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Signs You Need a Pro Right Now

  • White or black staining on the exterior brick. White staining usually points to water moving through the masonry, and black staining often means the flue is venting poorly. Both are worth a look before they get worse.
  • A strong creosote or smoky smell in the room. A chimney that smells strongly when it isn’t in use is often blocked or drawing badly. That’s a carbon-monoxide concern as much as an odor problem.
  • Visible cracks in the flue or crown. You may spot these from the ground or through the damper with a flashlight. Cracked flue tiles let heat reach the framing, and that’s the condition chimney fires start from.
  • Water in the firebox or a damp damper. Water getting past a failed cap, crown or flashing will damage the damper and the masonry behind it. Finding the source early is far cheaper than repairing the damage later.
  • A cap that’s loose, dented or missing mesh. A compromised cap invites animals, rain and debris into the flue. It’s a small repair that prevents a much larger one.

Our Process, Step by Step

  1. 1
    We book a visit and ask about the symptoms. Before we arrive we want to know what you’ve noticed: smells, staining, water, a draft, or a damper that won’t close. That shapes what we look at first.
  2. 2
    We inspect with a camera and document what we find. A camera inspection lets us see the flue interior and the smoke chamber, not just the firebox. We photograph the specific deficiencies rather than describing them in vague terms.
  3. 3
    We show you the evidence and explain the options. You see the photos. If there’s a middle path, such as HeatShield resurfacing instead of a full liner, we’ll explain when it applies and when it doesn’t.
  4. 4
    You get a written estimate before any work begins. The estimate names the repair, the material and the price. Nothing gets added on afterward without your agreement.
  5. 5
    We do the repair and confirm it’s right. Sweeping, inspection and repair happen under one service relationship, so the repair is finished by the same people who diagnosed it. We test the draw and check the cap, crown and flashing before we leave.

How Much Does Chimney Repair Cost in Boca Raton?

Chimney repair in Boca Raton typically runs from about $200 for a cap replacement up to $6,500 for a full liner installation, with most common repairs landing between $350 and $1,200. A typical cap replacement runs $200-$550 depending on the cap size. A typical flashing repair runs $350-$900 depending on roof pitch and the extent of the assembly being replaced. Crown repair runs $400-$1,200, masonry repointing runs $600-$2,500, and liner work runs $2,800-$6,500 depending on flue length and whether HeatShield resurfacing or full DuraFlex relining is the right approach.

Several things move the price. Flue length is the biggest factor in liner work, since material cost scales with height. The number of flues on the chimney affects cap and crown pricing. Access matters too: a chimney on a steep roof or behind landscaping takes longer than one with a clear approach. Whether the repair is corrective or preventive also changes the number, because stopping a leak early is cheaper than repairing the damage it caused.

The easiest way to avoid overpaying is to ask for the evidence before you agree to anything. Nothing should be recommended without camera photos you can look at yourself, and we’ll tell you plainly when a repair can safely wait a season. A free estimate includes the inspection findings, the photos, the recommended repair, and the written price.

Our Service Area Near Boca Raton

We work across Boca Raton and the surrounding communities, including Lake Worth Beach, Boynton Beach, Lantana, Lake Clarke Shores, Greenacres, Palm Springs, Wellington, Westgate and Palm Beach. Scheduling is straightforward: we book a visit and confirm the window with you. If your chimney needs attention in a neighboring town, you can read more about chimney repair there, or call and we’ll get you on the schedule.

Serving Boca Raton, FL – Our Local Coverage Area

We serve Boca Raton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Chimney Repair in Boca Raton

Schedule Your Chimney Repair Service in Boca Raton Today

If you’ve spotted a crack, a leak, a smell or a cap that’s seen better days, the cheapest repair is the one done before the damage spreads. Call (877) 685-2248 to book a chimney repair visit in Boca Raton. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and there’s no obligation, and you’ll see the camera evidence before anyone recommends a thing.

Written by the team at Chimney Sweep Boca Raton.

Why Boca Raton Chooses Chimney Sweep Boca Raton

We set the standard for chimney repair in Boca Raton.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Boca Raton

Getting your chimney repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Boca Raton Customers Say

Trusted by homeowners across Boca Raton and surrounding areas.

★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Yolanda Coleman
★★★★★

"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."

Hector Martinez
★★★★★

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

Maria Guzman

Ready for Chimney Repair in Boca Raton?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Boca Raton.

(877) 685-2248

Request a Free Estimate in Boca Raton

Tell us about your chimney repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - We Answer 24/7